UK/EU Stock

This item is located in UK/Europe and will ship from there.

Showing 1–24 of 5273 results

Show Filter
  • AME SHALLEN VFX

    19" X 11
    1,499

    AME SHALLEN VFX Sizes: 19×11 ET+26 PCD: 5X114.3 2-piece construction Brushed Centre, polished lip Tyres not included even if pictured. Condition as pictured.

  • Sale!

    APEXI POWER FC ECU – MAZDA RX7 FC3S 13B

    1,250 990

    AP ENGINEERING APEXI POWER FC MAZDA RX7 FC3S 13B Includes required adapter harness

  • APEXI POWER FC ECU – NISSAN S13 180SX SR20DET 96-99 D-JETRO

    599

    APEXI D-JETRO POWER FC Used, fully working condition. Bare ECU, sensors available separately. Car: 180SX Models: RPS13 Engine: SR20DET Years: 94/01 – 96/08 Apexi Code: 414-NO21 Serial: SR2D23 Compatible Commanders: FCC AD or FCC3 * Certain hand commanders are available separately if needed Please check our stock for the codes listed above

  • APEXI POWER FC ECU NISSAN SKYLINE R33 GTST RB25

    599

    APEXI POWER FC FOR NISSAN SKYLINE R33 GTS-T RB25DET Genuine Apexi Japan Parts Specific for ECR33 Nissan Skyline R33 GTST RB25DET Engine Suits both Series 1 and Series 2 R33 GTS-T

  • APEXI POWER FC SUBARU LEGACY GT-B TWIN TURBO BH5 BE5 EJ20

    690

    Includes adapter harness and map sensor. These are EXTREMELY rare and the best solution for easily mapping your Legacy.

  • ATS 2WAY LSD DIFF NISSAN SKYLINE SILVIA 200SX 180SX NON ABS 4.36

    650

    ATS 2WAY LSD DIFF NISSAN SKYLINE SILVIA 200SX 180SX NON ABS 4.36 ATS Non ABS Type 2 Way LSD. 4.36 Final Drive. R200 size diff housing. 6 Bolt (3×2) Output Flanges Included (S13, S14, S15). FITTING APPLICATIONS : Nissan S13 S14 S15 180sx silvia skyline (Further parts or customisation may be required) Verify compatibility with your […]

  • BBS RK 003 BMW

    17" X 8.5
    799

    BBS RK 003 BMW Sizes: 17×8.5 Offset +15 PCD: 5×120 Matte Black finish. Very good condition. Tires not Included. Condition as pictured.

  • BLITZ SBC SPEC-S BOOST CONTROLLER

    299

    SBC Type S Boost Controller The SBC boost controller features a compact body only 12mm thick. The highly efficient solenoid ensures excellent boost stability, control and response. The SBC Type S features a single solenoid that diverts pressure away from the turbo actuator to achieve higher boost. This single solenoid is linked to a smart […]

  • BMW 3 / 5 SERIES HSD COILOVER SUSPENSION SET

    7501,032

    BMW 3 / 5 SERIES HSD COILOVER SUSPENSION SET Overview: All E36 and later BMW 3 series use MacPherson strut front suspension and inboard rear spring setups. This allows for front camber adjustment via the top mounts and OEM style seperate spring and shock rear suspension, allowing for great levels of adjustability. E39 5 series […]

  • BRIDE ARTIS II RACING SEAT

    550

    BRIDE ARTIS II RACING SEAT Red cloth. Black FRP rear shell. Fixed back. Side Mount seat rail required. *Rail and harness not included even if pictured.* Why buy your seat from JDMDistro: All of our seats are authentic Bride and Recaro, JDM sourced through our office in Tokyo. We take pride in the quality of […]

  • Sale!

    BRIDE BRIX 1.5 RACING SEAT

    699 650

    BRIDE BRIX 1.5 RACING SEAT Red cloth. Bride red gradient logo centre cushions. Recliner type. Bottom mount rail required. Rails not included. Why buy your seat from JDMDistro: All of our seats are authentic Bride and Recaro, JDM sourced through our office in Tokyo. We take pride in the quality of the parts we source. […]

  • BRIDE BRIX II RACING SEAT

    550

    BRIDE BRIX II RACING SEAT Black cloth. Black centre cushions. Recliner type. Bottom mount rail required. Rails not included. Why buy your seat from JDMDistro: All of our seats are authentic Bride and Recaro, JDM sourced through our office in Tokyo. We take pride in the quality of the parts we source. New or used, […]

  • Sale!

    BUDDYCLUB P1 RACING

    17" X 8, 9
    899 799

    BUDDYCLUB P1 RACING Front: 17×8 Offset +32 Rear: 17×9 Offset +37 PCD: 5×114.3 Gunmetal grey finish. Flat Face Gen 1 version. Tires not Included. Condition as pictured.

  • BUDDYCLUB P1 RACING

    17" X 7, 8
    799

    BUDDYCLUB P1 RACING Front: 17×7 Offset +43 Rear: 17×8 Offset +42 PCD: 5×114.3 Original Bronze finish. Flat Face Gen 1 version. Tires not Included. Condition as pictured.

  • CRIMSON RS WP MAXI

    19" X 10.5, 9
    1,799

    CRIMSON RS WP MAXI Front: 19×9 Offset +17 Rear: 19×10.5 Offset +7 PCD: 5×114.3 Multipiece construction. Candy Red face, Polished lip. Tyres not included. Condition as pictured.

  • CUSCO 9-POINT ROLL CAGE NISSAN SKYLINE R32

    650

    CUSCO D1 9-POINT ROLL CAGE NISSAN SKYLINE R32 Dash escape. Bolt in, no welding required and easily removable. Lightweight D1 Version, chromalloy construction. Conditioned as pictured. Application: SKYLINE R32 GTST GTR, 2-door coupe **THIS ITEM IS ONLY INTENDED FOR SHIPPING WITHIN EUROPE. PLEASE DO NOT ORDER WITHOUT CONTACTING FIRST IF YOU ARE OUTSIDE OF EUROPE AS […]

  • Sale!

    CUSCO ROLL CAGE NISSAN SKYLINE R32

    550 499

    CUSCO 6-POINT ROLL CAGE FOR NISSAN SKYLINE GTR GTS-T Dash dodger / Dash escape. Padding for additional safety. Bolt in, no welding required and easily removable. For Nissan Skyline R32 GTST GTR, 2-door coupe versions.

  • DEFI ADVANCE FITTING KIT

    15

    This fitting kit allows you to mount your 52/60mm Defi Gauges on your A-Pillar. This kit works with the original Defi-Link gauges, ADVANCE, ADVANCE ZD and Racer series.

  • DEFI ADVANCE LINK METER WIRES

    1020

    The Defi Meter wire is the display connection cable that you use to hook up from your Defi control unit II to your gauge. At times a longer cable is required for more advanced installations, IE control unit in glove box, and gauges on the A-pillar. Please select your required length from the drop down […]

  • DEFI ADVANCE SERIES FITTING ACCESSORIES AND MISCELLANEOUS WIRING

    1270

    These products are designed for use with the DEFI advance series gauges. Please select the product required from the drop down menu.Not all Advance series sensor wires are cross compatible with all models within the Advance series range, please double check using the part number listed in the drop down menu. If you are unsure about […]

  • DEFI ADVANCE SERIES SENSOR WIRES

    3584

    These sensor wires are designed for use with the DEFI advance series gauge sensors. Please select the sensor wire required from the drop down menu. Not all Advance series sensor wires are cross compatible with all models within the Advance series range, please double check using the part number listed in the drop down menu. If […]

  • DEFI ADVANCE SERIES SENSORS

    55205

    These sensors are designed for use with the DEFI advance series gauges. Sensor wires to connect your sensor to the control unit are available separately here. (not required for the sensor + wire sets listed) Not all Advance series sensors are cross compatible with all models within the Advance series range, please double check using […]

  • DEFI DIN GAUGE

    565

    The DEFI DIN-Gauge is a 1-DIN sized triple meter system, for providing information on a pressure, and oil / water temperature. “DIN” is an abbreviation for Deutsche Industrie Normen(German industrial standard). The vast majority of audio headunits are DIN sized. A DIN-Gauge can be neatly installed in a DIN sized vacant space in your automobile. […]